Kaloc KLC-DS200 Single Monitor Arm for 17-32 Inch Screens
BDT 2,290
Quantity
Clear your desk and set your screen at the right height with the Kaloc KLC-DS200 monitor arm. It lifts a 17-32 inch monitor off the desk, so you get back working space and a more comfortable viewing position.
This single monitor arm is made of aluminum and holds screens up to 9 kg. It moves in several directions (height, tilt, swivel and reach), so you can set your screen where it suits you.
If you work long hours at a desk, play games, or share a workspace, the Kaloc monitor arm makes it easy to adjust your screen throughout the day. A clamp or grommet mount keeps it steady on most desks.
Key Features
Aluminum construction: The arm is built from aluminum, which keeps it sturdy while the full unit weighs only about 2.7 kg, so it is easy to carry and set up.
9 kg load capacity: It supports a wide range of 17-32 inch monitors within this weight limit, giving you a stable mount for everyday office, study or gaming screens.
VESA 75x75 and 100x100 mounting: Both standard hole patterns are supported, so most modern monitors with VESA mounting points can be attached without extra adapters.
Tilt from -90° to +90°: You can angle the screen up or down to cut glare and reduce neck strain.
360° swivel: Rotate the screen to share your display with a colleague or switch between sitting and standing positions.
Reach up to 542 mm, height up to 420 mm: Pull the monitor closer or push it back to find the viewing distance that suits you.
Height adjustable: Raise or lower the screen to bring it in line with your eyes.
Built-in cable management: Route your cables through the arm so your desk looks neater.
Clamp or grommet mounting: The clamp fits desks 15-95 mm thick, and the grommet mount fits holes 10-50 mm wide, so it works with a variety of desk styles.
Why Choose the Kaloc KLC-DS200 Monitor Arm
The Kaloc KLC-DS200 is a practical upgrade for anyone who wants a better desk setup without a complicated installation. Mounting the screen on the arm frees the space a monitor stand would take up, leaving room for your keyboard, notes or accessories.
Better posture: Adjusting height, tilt and distance helps you sit comfortably for long sessions.
More desk space: The monitor floats above the desk instead of sitting on it.
Flexible setup: Both clamp and grommet mounting give you options for different desks.
Wide screen range: One arm covers monitors from 17 to 32 inches, so it still works if you change screens later.
Tidier look: Cable management helps hide loose wires.
Anyone searching for a reliable Kaloc monitor arm in Bangladesh will find a good balance of adjustability, build quality and everyday usability here.
Best Use Cases
Home office and work-from-home desks: Set the screen at eye level and free up working space.
Students: Fit a monitor on a small study table without it taking over the surface.
Gaming setups: Bring the screen closer or angle it for the best view.
Shared workspaces: Swivel the display to show your work to others.
Technical Specifications
Detail | Value |
|---|---|
Model number | KLC-DS200 |
Product type | Single monitor arm |
Supported screen sizes | 17 to 32 inches |
Weight capacity | Up to 9 kg |
Build material | Aluminum |
Mounting hole patterns (VESA) | 75 x 75 mm and 100 x 100 mm |
Tilt range | -90° to +90° |
Rotation (swivel) | 360° |
Maximum arm reach | 542 mm |
Maximum lifting height | 420 mm |
Desk thickness for clamp | 15 to 95 mm |
Minimum space needed at clamp point | 60 mm |
Grommet hole diameter | 10 to 50 mm |
Height adjustment | Yes |
Cable routing | Built-in cable management |
Overall size | 105 x 420 x 542 mm |
Product weight | Approx. 2.7 kg |
Coverage | No warranty listed by the manufacturer |
Compatibility
pattern, weighing up to 9 kg.
Desks: Tabletops 15-95 mm thick when using the clamp, or desks with a pre-drilled hole of 10-50 mm when using the grommet mount.
Clearance: At least 60 mm of free space is needed at the clamp point.
Frequently asked questions
What screen sizes does the Kaloc KLC-DS200 monitor arm support?
It supports monitors from 17 to 32 inches, with a maximum load of 9 kg.
Which VESA patterns does this monitor arm fit?
It fits VESA 75 x 75 mm and 100 x 100 mm, the two most common patterns
Can I mount it on any desk?
You can use a clamp on desks 15-95 mm thick, or a grommet mount through a hole 10-50 mm wide. You also need at least 60 mm of clearance at the clamp point.
How far can the screen move?
The arm reaches up to 542 mm and lifts to a maximum height of 420 mm. It tilts from -90° to +90° and swivels 360°.
KALOC Store
More in-stock picks from this brand
