
TP-Link EAP245 AC1750 Wireless Access Point with PoE
৳11,420
Good to know
- 7 days replacement warranty
- Cash on delivery available
- Ask on WhatsApp
Specifications
| Brand | TP-Link |
|---|---|
| Model | EAP245 AC1750 |
| Type | Wireless Dual-Band Gigabit Ceiling Mount Access Point |
| Wireless Standards | IEEE 802.11ac/n/g/b/a |
| Wireless Frequency | 2.4GHz and 5GHz |
| Wireless Rate | 5GHz: up to 1300Mbps; 2.4GHz: up to 450Mbps |
| Antenna | Internal omni; 2.4GHz: 3 × 4dBi; 5GHz: 3 × 4dBi |
| Ethernet | 2 × Gigabit Ethernet (RJ-45) Ports |
| Power Input | 802.3af/at PoE or 48V Passive PoE (+4,5 pins; -7,8 pins), PoE adapter included |
| Power Consumption | 12.3 W |
| Wireless Security | Captive Portal Authentication; 802.1X support; 64/128/152-bit WEP, WPA, WPA2-Enterprise, WPA-PSK, WPA2-PSK |
| Access Control | Wireless MAC Address Filtering; Wireless Isolation Between Clients; SSID to VLAN Mapping; Rogue AP Detection |
| Button | Reset |
| Dimensions | 206 × 182 × 37 mm (8.1 × 7.1 × 1.5 in) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
Description
The TP-Link EAP245 is a dual-band ceiling mount access point that adds strong Wi-Fi coverage to offices, shops and other busy spaces. It delivers up to 1300Mbps on 5GHz and up to 450Mbps on 2.4GHz, so both newer and older devices stay connected.
It runs on Power over Ethernet, so one network cable can carry both data and power to the ceiling. Two Gigabit Ethernet ports and six internal omni-directional antennas round out the hardware.
If you are looking for a TP-Link access point with business security features such as captive portal, VLAN mapping and 802.1X support, the EAP245 is available in Bangladesh from Geary BD.
Key Features
- AC1750 dual-band Wi-Fi: The access point runs 2.4GHz and 5GHz at the same time, with up to 450Mbps and 1300Mbps respectively. You can place newer devices on the faster 5GHz band and keep the 2.4GHz band for older ones.
- IEEE 802.11ac/n/g/b/a support: The access point works with a wide range of client devices, old and new.
- Six internal omni-directional antennas (3 × 4dBi per band): Antennas for each band spread the signal around the unit, which helps coverage from a ceiling position.
- 2 Gigabit Ethernet (RJ-45) ports: Gigabit ports keep wired speeds high between the access point and your network.
- PoE powered (802.3af/at or 48V passive PoE): One cable carries data and power, so you do not need a power socket near the ceiling. A PoE adapter is listed as included.
- Captive portal authentication: You can show a login page to guests before they get access, which is useful for shops, cafes and offices.
- SSID to VLAN mapping and wireless client isolation: You can keep staff, guest and device traffic on separate networks, and stop wireless clients from talking to each other.
- MAC address filtering and rogue AP detection: You control which devices can join, and the access point helps you spot unauthorized access points on your network.
- 802.1X, WPA-PSK/WPA2-PSK and WPA/WPA2-Enterprise security: Home-style and enterprise-style authentication are both supported, so you can match security to your network.
- 12.3 W power consumption: The access point draws modest power, which helps keep running costs low for a device that stays on all day.
Why Choose the TP-Link EAP245 Wireless Access Point
This wireless access point combines dual-band speed with the security tools that business networks need. A single PoE cable, Gigabit ports and a ceiling mount design make installation tidy.
Captive portal, VLAN mapping, client isolation and 802.1X let you build separate guest and staff networks on one device. That matters for shops, offices and small business sites in Bangladesh.
A TP-Link access point also suits people who want a known brand with a clear specification sheet. The EAP245 lists its speeds, ports, power and operating conditions openly, so you can plan your network with confidence.
Best Use Cases
- Offices that need reliable Wi-Fi from a ceiling-mounted unit
- Shops and cafes that offer guest Wi-Fi with a login page
- Networks that separate staff and guest traffic with VLANs
- Sites where running power to the ceiling is difficult, since PoE carries power over the network cable
Compatibility
- Wi-Fi clients: devices that support IEEE 802.11ac, n, g, b or a
- Power sources: 802.3af/at PoE switches or injectors, or 48V passive PoE using the included PoE adapter
Warranty
7 days replacement warranty
Read the warranty policyReviews
Frequently asked questions
What does AC1750 mean on the TP-Link EAP245?
AC1750 is the combined rating of the two bands: up to 1300Mbps on 5GHz and up to 450Mbps on 2.4GHz. Each device connects to one band at a time.
Does the TP-Link EAP245 support PoE?
Yes. It accepts 802.3af/at PoE or 48V passive PoE, so one network cable can power the access point.
Is a PoE adapter included?
Yes. The specification lists a PoE adapter as included for the 48V passive PoE option.
How many Ethernet ports does it have?
It has 2 Gigabit Ethernet (RJ-45) ports.
Does this access point support VLANs and guest login pages?
Yes. It supports SSID to VLAN mapping and captive portal authentication.
TP-Link Store
More in-stock picks from this brand






















