Tl SG1218MP 16 Poe Plus Ports and Sfp Slots Front Panel

TP-Link TL-SG1218MP 18-Port Gigabit PoE+ Rackmount Switch

By TP-LinkIn stock

৳24,990

1

Good to know

Specifications

ModelTP-Link TL-SG1218MP
OperationPlug and play, no configuration required
Ports16 gigabit PoE+ RJ45, 2 gigabit non-PoE RJ45, 2 combo gigabit SFP slots
PoE PortsPorts 1 to 16 (IEEE 802.3af/at compliant)
PoE Power Budget250W total, up to 30W per PoE port
Supported StandardsIEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3af, 802.3at, 802.1q, 802.1p
Cable Support10BASE-T: Cat 3/4/5 UTP; 100BASE-TX: Cat 5/5e UTP; 1000BASE-T: Cat 5/5e/6 or above UTP; 1000BASE-X: MMF/SMF; up to 100 m per copper run
Switching Capacity36 Gbps
Packet Forwarding Rate26.78 Mbps (as listed by the manufacturer)
Packet Buffer4.1 Mbit
MAC Address Table8K entries
Jumbo Frame10 KB
Other FeaturesMAC address auto-learning and auto-aging; IEEE 802.3x flow control (full-duplex) and backpressure (half-duplex)
Cooling2 fans
SecurityPhysical security lock
Power Input100–240 V AC, 50/60 Hz
Max Power Consumption21.4 W with no powered device; 286.6 W with 250 W of powered devices
Max Heat Dissipation73.0 BTU/h with no powered device; 977.4 BTU/h with 250 W of powered devices
Dimensions (W × D × H)440 × 180 × 44 mm (17.3 × 7.1 × 1.73 in)
Mounting19-inch 1U rackmount
Operating Temperature0 to 50 °C (32 to 122 °F)
Storage Temperature-40 to 70 °C (-40 to 158 °F)
Operating Humidity10% to 90% RH, non-condensing
Storage Humidity5% to 90% RH, non-condensing
CertificationCE, FCC

Description

Running IP cameras, Wi-Fi access points and VoIP phones from one rack gets much simpler when the switch delivers power and data together. The TP-Link TL-SG1218MP is an 18-port gigabit PoE switch with 16 PoE+ ports and a 250W power budget, so your devices need only a single network cable each.

For shops, offices, schools and CCTV setups, this tp-link switch is plug and play, with no configuration or software setup needed. Connect your devices, power it on and the network is ready to carry traffic.

The metal casing, 19-inch 1U rackmount design and two combo SFP slots make it a practical choice for a structured network that may grow later.

Key Features

  • 16 gigabit PoE+ ports: Ports 1 to 16 supply both data and power, so IP cameras, access points and IP phones can run without separate power adapters.
  • 250W total PoE budget, up to 30W per port: There is enough power for a full set of standard PoE and PoE+ devices, including higher-draw cameras and access points.
  • IEEE 802.3af/at compliance: Works with standard compliant powered devices, so you are not tied to a single brand.
  • 2 gigabit non-PoE RJ45 ports: Use them for an uplink, a router, a server or any device that does not need PoE.
  • 2 combo gigabit SFP slots: Add a fiber link to another switch or building when copper cabling reaches its limit.
  • Plug and play operation: No configuration or installation work is needed, which saves setup time.
  • 802.1p QoS support: Latency-sensitive traffic such as voice and video gets smoother handling.
  • Durable metal casing with heat dissipation design: Built for rack environments, with an operating range of 0 to 50 °C and two cooling fans.
  • 19-inch 1U rackmount with physical security lock: It fits standard racks, and the lock helps protect the unit from tampering.

Why Choose TP-Link TL-SG1218MP 18-Port Gigabit PoE Switch

If you are building a camera or access point network, the biggest advantage is simplicity. One cable per device handles power and data, which keeps cabling cleaner and installation faster. The 250W budget gives you room to run a full set of devices from one box.

It is also a sensible pick if you want a trusted tp-link switch without a complicated setup. There is nothing to configure, and compliance with IEEE 802.3af/at means it works with a wide range of PoE devices. The two SFP slots keep the door open for fiber uplinks as your network grows.

The rack-ready metal body, security lock and wide operating temperature range make it suitable for server rooms, wiring cabinets and small business setups where the switch runs all day.

Best Use Cases

  • CCTV and IP camera systems for shops, offices and warehouses
  • Wi-Fi access point deployments in offices, schools and hotels
  • IP phone and VoIP setups
  • Small business and server room rack networks

Compatibility

 Works with IEEE 802.3af/at compliant powered devices, such as IP cameras, wireless access points and IP phones. Copper ports support Cat 5e or better cabling for gigabit speeds, and the SFP slots support 1000BASE-X multimode and single-mode fiber.  

Package Includes

  • TL-SG1218MP switch
  • Installation guide
  • Power cord
  • Rackmount kit
  • Rubber feet

Warranty

7 days replacement warranty

Read the warranty policy

Reviews

Frequently asked questions

How many PoE ports does the TP-Link TL-SG1218MP have?

It has 16 gigabit PoE+ ports (ports 1 to 16), plus 2 gigabit non-PoE RJ45 ports and 2 combo gigabit SFP slots.

What is the total PoE power budget?

The total PoE budget is 250W, and each PoE port can deliver up to 30W.

Do I need to configure this switch?

No. It is plug and play, with no configuration or installation software needed.

Can I use it with IP cameras and access points?

Yes. It supports IEEE 802.3af/at compliant powered devices, which covers most standard IP cameras, access points and IP phones.

TP-Link Store

More in-stock picks from this brand

View All

Related Products

View All
WhatsApp