
Aptech PA30 CCTV Camera Power Adapter 12V 2A Output
৳245
Good to know
- 7 days replacement warranty
- Cash on delivery available
- Ask on WhatsApp
Specifications
| Output Voltage | 12V DC |
|---|---|
| Output Current | 2A |
| Input Voltage | 100–240V AC, 50/60Hz |
| Max Power | 24W |
| Connector Size | 5.5mm x 2.1mm |
| Housing Material | Flame-retardant Plastic |
| Plug Type | 2-Pin US/EU Style |
Description
Security cameras require steady, uninterrupted DC power to capture clear footage around the clock, especially during night vision mode when infrared LEDs kick in. Cheap or degraded power bricks often lead to video flickering, lines across the display, or random camera restarts that leave blind spots in your surveillance setup.
The Aptech PA30 12V 2A power adapter provides a stable 12V direct current output rated up to 2 Amps, making it a reliable drop-in replacement or upgrade for standalone CCTV cameras, analog DVR channels, and compatible network gear. Its standard DC barrel connector ensures a firm connection that prevents loose contact issues.
Key Features of Aptech PA30 Power Adapter
- Stable 12V 2A Output: Delivers sufficient current for both day and night recording modes without dropping voltage.
- Standard DC Barrel Jack: Fits standard 5.5mm x 2.1mm CCTV power ports and generic 12V electronics.
- Compact Wall-Plug Design: Plugs directly into your multi-plug or switchboard without blocking adjacent sockets.
- Built-In Circuit Protection: Helps safeguard connected equipment against minor power surges and short circuits.
- Durable Outer Housing: Constructed from heat-resistant plastic to withstand continuous 24/7 operation.
Why Choose This Aptech 12V Adapter
When selecting a power supply for surveillance, continuous duty is the primary consideration. Many generic adapters run dangerously hot when pushed to near-capacity for extended hours. The Aptech PA30 is designed to operate continuously under standard indoor conditions without severe thermal throttling, ensuring your cameras remain powered day and night.
However, note that this adapter is intended for single-device operation or very low-draw split setups. Attempting to power multiple high-draw PTZ cameras or IR illuminators from a single 2A unit will cause voltage sag, so ensure your device's power requirements do not exceed 24 watts total.
Best Use Cases
- Powering analog HD (AHD, TVI, CVI) dome or bullet cameras.
- Single standalone Wi-Fi IP security cameras requiring 12V DC.
- Wi-Fi routers, ONU devices, or broadband switches with 12V/2A input.
- Replacing faulty OEM power supplies on LED strips or small testing equipment.
Device Compatibility
Compatible with most CCTV cameras requiring 12V up to 2A, including brands like Hikvision, Dahua, and CP Plus. It also powers 12V Wi-Fi routers, fiber ONUs, and LED light strips.
Package Includes
1x Aptech PA30 12V 2A CCTV Power Adapter with integrated DC cable.
Warranty & Support
Backed by replacement warranty against manufacturing defects. Physical damage, burnt components due to extreme power surges, and water ingress are not covered.
Warranty
7 days replacement warranty
Read the warranty policyReviews
Frequently asked questions
What is the price of Aptech PA30 CCTV Camera Power Adapter 12V 2A Output in Bangladesh?
The Aptech PA30 CCTV Camera Power Adapter 12V 2A Output is priced at ৳245 in Bangladesh. It is available at GearyBD with cash on delivery across Bangladesh, subject to stock availability.
Can I use this adapter with a 12V 1A or 1.5A camera?
Yes. The device only draws the current it needs, so using a 2A adapter for a 1A device is completely safe and runs cooler.
Will this power a Wi-Fi router or ONU?
Yes, as long as your router or ONU specifies a 12V input with a matching standard 5.5mm DC connector and requires 2A or less.
Is this adapter waterproof for outdoor installation?
No. The adapter is not waterproof and must be placed inside an indoor outlet or inside a weatherproof CCTV junction box.
Can I power multiple cameras with this single adapter using a splitter?
You can only split power if the combined current draw of the cameras remains well below 2A. For multiple IR cameras, dedicated separate power or a centralized power supply is recommended.
Aptech Store
More in-stock picks from this brand


















