Tenda O3 Wireless Outdoor Point to Point CPE 150Mbps

The Tenda O3 Outdoor Point to Point CPE links two locations wirelessly over distances of up to 5km, so you can skip the cost and effort of laying a long cable between buildings. It combines a 12dBi directional antenna, 150Mbps wireless speed and PoE power in one outdoor-ready unit.

It suits remote CCTV cameras, branch offices, warehouses, farms and factories. If you are looking for a Tenda outdoor CPE that is simple to power and easy to point at the far end of your link, the O3 is a practical choice.

Key Features

• 5km wireless link: connects two distant sites without trenching or running long cables, which saves installation time and cost.
• 12dBi directional antenna: focuses the signal in one direction (60° horizontal, 30° vertical beamwidth), so the link stays stronger and more stable than with a wide-coverage antenna.
• 150Mbps data rate on 2.4GHz: works on IEEE 802.11n/g/b and gives enough speed for CCTV streams, office tasks and everyday browsing at the remote end.
• Two Fast Ethernet ports: one PoE/WAN/LAN port and one LAN port let you connect a switch, IP camera or other wired device at the far end.
• PoE power supply: a single Ethernet cable carries both data and power through the included-style 12V 1A PoE injector setup, so you only need power at the indoor end. The device draws at most 6W.
• Adjustable transmit power (1dBm steps): lets you fine-tune the signal for your link distance and surroundings.
• Multiple encryption options: supports 64/128 WEP, WPA-PSK, WPA2-PSK, WPA&WPA2-PSK, WPA and WPA2 to help keep your wireless link protected.
• Reset (RST) button: restores the device quickly if a setting change causes trouble.
• 1-year manufacturer warranty: gives you support if a fault appears after purchase.

Why Choose Tenda O3 Outdoor Point to Point CPE

The Tenda O3 is built for one job: creating a dependable long-distance wireless link between two points. A rated range of 5km, a focused 12dBi antenna and power over Ethernet make it a sensible alternative to expensive cabling projects.

• Lower setup cost: no long cable runs between buildings or across open ground.
• Simple power arrangement: one Ethernet cable and a PoE injector handle both data and power.
• Low power use: a maximum consumption of just 6W keeps running costs small for always-on links.
• Flexible tuning: adjustable transmit power helps you match the signal to your site.
• Trusted brand and warranty: Tenda networking gear comes with a 1-year manufacturer warranty.

Best Use Cases

• Building-to-building links for shops, offices and branches
• Remote CCTV and IP camera connections
• Warehouses, factories and farms
• Extending a wired network to hard-to-cable locations

Technical Specifications

Feature	Details
Model	Tenda O3
Product Type	Outdoor point-to-point wireless CPE
Wireless Standard	IEEE 802.11n/g/b
Frequency Band	2.4GHz
Maximum Data Rate	150Mbps
Wireless Range	5km
Antenna	12dBi directional antenna
Antenna Beamwidth	60° horizontal, 30° vertical
Ethernet Ports	1 × Fast Ethernet PoE/WAN/LAN port, 1 × Fast Ethernet LAN port
Reset Button	1 × RST button
Wireless Security	64/128 WEP, WPA-PSK, WPA2-PSK, WPA&WPA2-PSK, WPA, WPA2
Power Supply	PoE injector, 12V 1A
Maximum Power Consumption	6W
Transmit Power Adjustment	In 1dBm steps
Dimensions	270 × 94.86 × 67.5 mm
Color	White
Warranty	1 year manufacturer warranty