TRENDnet TPE-113GI Gigabit PoE Injector with 100m Reach

The TRENDnet TPE-113GI Gigabit PoE injector sends data and power to a compatible device over a single Ethernet cable. You can place a PoE device up to 100 meters from your switch or router, even where no power outlet is nearby. That means fewer cables to run and a cleaner installation.

It suits networks that mix PoE and non-PoE equipment. Add it to an existing Gigabit switch and you get PoE where you need it without replacing the switch. If you are looking for a reliable TRENDnet PoE injectorfor a camera, access point or other IEEE 802.3af device, this compact unit covers the job.

Key Features

• Full-duplex Gigabit speeds: Both Ethernet ports run at 10/100/1000 Mbps, so adding PoE does not slow your connection down to Fast Ethernet.
• Power and data up to 100 meters (328 feet): You can install PoE devices far from your network equipment, such as in a corner of a building or at a distant mounting point.
• IEEE 802.3af PoE standard: It follows a recognized standard, so it is built to power 802.3af devices.
• Separate DATA-IN and PWR+DATA OUT ports: The labeled ports make the setup clear. Connect your network to one port and your PoE device to the other.
• Lower installation and equipment costs: It gives you PoE on a non-PoE network, so you can skip a separate power run or a full PoE switch upgrade.
• Integrated PoE and non-PoE Gigabit network: Standard devices and PoE devices can share one network.
• Compact 70 x 45 x 25 mm body: It is small enough to sit on a shelf or in a rack or cabinet beside your switch.
• 2-year warranty: You get 24 months of manufacturer coverage after purchase.

Why Choose TRENDnet TPE-113GI Gigabit PoE Injector

A Gigabit PoE injector is one of the simplest ways to add power-over-Ethernet to a network that does not have it. With the TPE-113GI you keep your current switch or router and add PoE only where a device needs it.

• Keeps full Gigabit speed: Data passes through at up to 1000 Mbps, so cameras, access points and other PoE devices are not held back.
• One cable instead of two: Power and data travel together, so you avoid pulling a separate power line to the device.
• Long reach: 100 meters is enough for many room-to-room, floor-to-floor and outdoor mounting layouts.
• Simple setup: There are only two ports. One takes data in, and the other sends data and power out.
• Trusted brand and warranty: TRENDnet networking gear comes with a 2-year manufacturer warranty on this model.

Best Use Cases

• Security cameras: Mount IEEE 802.3af PoE cameras where there is no power socket.
• Wireless access points: Place access points in the best coverage spot, not just near a power outlet.
• Home and small office networks: Add PoE to a regular Gigabit switch without replacing it.
• Network upgrades: Power one or two PoE devices without buying a full PoE switch.

Technical Specifications

Specification	Details
Brand	TRENDnet
Model	TPE-113GI
Product Type	PoE injector
Input Port	1 x 10/100/1000 Mbps DATA-IN port (carries data only)
Output Port	1 x 10/100/1000 Mbps PWR+DATA OUT port (carries data and power)
Supported Standards	IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX), IEEE 802.3ab (Gigabit Ethernet), IEEE 802.3af (Power over Ethernet)
Cabling at 10 Mbps	UTP/STP Cat 5 or Cat 5e, up to 100 meters
Cabling at 100 Mbps	UTP/STP Cat 5 or Cat 5e, up to 100 meters
Cabling at 1000 Mbps	UTP/STP Cat 5e or Cat 6, up to 100 meters
Power Input	100 to 240V AC, 50 to 60Hz, 0.4A maximum
Power Output	48V DC, 0.4A, up to 18W
Size (W x D x H)	70 x 45 x 25 mm (2.75 x 1.8 x 1 in.)
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Warranty	2 years (manufacturer)