TRENDnet TPE-E100 Gigabit PoE+ Repeater, 200m Range

The TRENDnet TPE-E100 Gigabit PoE+ repeater helps you carry Power over Ethernet well beyond a single cable run, giving you a total distance of up to 200 meters (656 ft). If a PoE-powered device sits far from your switch, this repeater bridges the gap without extra power cabling at the far end.

It has one Gigabit PoE/PoE+ input port and one Gigabit PoE/PoE+ output port, and it supports IEEE 802.3af and 802.3at. The rugged metal housing and wall-mount points make it a practical fit for tidy, long-term installations.

If you are searching for a TRENDnet PoE repeater to extend a wired network, the TPE-E100 keeps setup simple. Connect the input, connect the output, and check the LED indicators.

Key Features

• Up to 200 m total distance (656 ft): Places PoE-powered devices much farther from the switch, so you can cover larger sites with fewer compromises.
• Daisy chain two units for 300 m (980 ft): Chaining two repeaters extends a PoE+ network even further for long runs.
• Gigabit PoE/PoE+ in and out ports: Passes data and power through one unit, so the extended link stays fast and your cabling stays simple.
• IEEE 802.3af and 802.3at support: Works with the standard PoE and PoE+ specifications, which makes it easier to fit into an existing PoE setup.
• No external power required: Reduces the need for a nearby power outlet at the install point. A power port is also available if you choose to use an optional adapter, which is not included.
• Rugged metal housing: Gives the unit a sturdy build for fixed installations.
• Wall-mountable with LED indicators: Mounting points keep the unit secure and off the floor, and the LEDs let you check status at a glance.
• Compact size (75 x 100 x 22 mm): Easy to tuck into tight spots along a cable route.

Why Choose the TRENDnet TPE-E100 Gigabit PoE+ Repeater

The main advantage is reach. Instead of redesigning a layout or adding a second switch location, you can extend an existing PoE+ link up to 200 meters, or 300 meters when two units are daisy chained.

It also keeps the installation clean. Gigabit in and out ports carry both data and power, and the compact metal body mounts to a wall. The 2-year manufacturer warranty adds peace of mind for projects that need dependable, long-term operation.

For buyers comparing a TRENDnet PoE repeater, the TPE-E100 is a straightforward choice. It combines standards support, simple connections, and a durable build in one small unit.

Technical Specifications

Specification	Details
Model Number	TPE-E100
Device Category	PoE Injector
Maximum Reach	Up to 200 m (656 ft) total; two units daisy chained for 300 m (980 ft)
Network Ports	1 x Gigabit PoE/PoE+ input; 1 x Gigabit PoE/PoE+ output
DC Power Jack	1 x power port (optional power adapter not included)
Status Lights	LED indicators
Mounting	Installation mounting points (wall mountable)
Housing	Rugged metal
Supported Standards	IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3af, 802.3at
Ethernet Speed	10 Mbps half duplex, 20 Mbps full duplex
Fast Ethernet Speed	100 Mbps half duplex, 200 Mbps full duplex
Gigabit Speed	2000 Mbps full duplex
Operating Temperature	-10°C to 45°C (14°F to 113°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Power Input	100-240 V, 50/60 Hz, 0.75 A
Power Output	48 VDC, 0.75 A
Maximum Power Draw	36 W (with the separately sold power adapter)
Size (L x W x H)	75 x 100 x 22 mm (3.0 x 3.9 x 0.9 in)
Manufacturer Warranty	2 years